Complete whole-home water system: $2,950 installed Call or text (215) 555-0100
Bucks Water Co. — Water Filtration & Purification
  1. Home
  2. Bucks County Water Guide
Guide Updated 2026

The Bucks County water quality guide.

Hard water, private wells, chlorine and PFAS: what to know about the water in your part of Bucks County, and how to find out what's coming out of your tap.

Bucks County covers more than 600 square miles, from bedrock wells along the upper Delaware River to treated river water in Bristol and Bensalem. That variety means there's no single answer to "how's the water?" It depends on where you live and where your water comes from.

1. Public water or private well?

This is the first question. If you pay a water bill, you're on public water. A utility treats it and tests it regularly, and it publishes an annual water quality report. If you don't pay a water bill, you almost certainly have a private well, and its water quality is your responsibility.

2. Water by region

Upper Bucks

Most Upper Bucks homes rely on private wells drilled into the shale, sandstone and diabase bedrock of the Newark Basin. Well water here commonly carries hardness, iron, manganese and low pH, and some wells test positive for bacteria, radon or naturally occurring arsenic.

  • Hard water and scale
  • Iron and manganese staining
  • Low pH (acidic) water and blue-green stains
  • Sulfur (rotten-egg) odor
  • Bacteria, arsenic or radon in some wells

Central Bucks

Central Bucks is a mix of public water and private wells. Hard water is common, especially over the limestone of the Buckingham Valley. Homes on public water often notice the chlorine used to disinfect it, and well owners deal with the same iron and pH issues found further north.

  • Hard water, often very hard in limestone areas
  • Chlorine or chloramine taste and smell
  • Iron and low pH on private wells
  • Spots, scale and shortened appliance life

Lower Bucks

Most Lower Bucks homes are on public water, drawn from sources such as the Delaware River, Neshaminy Creek and regional wells, then treated and disinfected with chlorine or chloramine. It meets safety standards, but many families notice chlorine taste and hardness spots, and want an extra barrier against things like PFAS and older plumbing.

  • Chlorine or chloramine taste and odor
  • Moderate to hard water and spotting
  • Older pipes and fixtures in established neighborhoods
  • Interest in PFAS and contaminant protection

Warminster–Warrington area

This area sits near the former Naval Air Warfare Center Warminster and NAS Joint Reserve Base Willow Grove, where firefighting foam contaminated groundwater with PFAS ("forever chemicals"). Public suppliers have added treatment, and the EPA set national PFAS limits in 2024, but many residents, and especially private well owners, add their own filtration for peace of mind.

  • PFAS "forever chemicals" (PFOA, PFOS and others)
  • Chlorine or chloramine taste and odor
  • Hard water and scale
  • Private wells that have never been PFAS-tested

3. Understanding water hardness

Hardness is measured in grains per gallon (GPG) or milligrams per liter (mg/L). Here's the standard scale:

ClassificationGPGmg/LWhat you'll notice
Soft0 – 10 – 17Easy lather, no scale
Slightly hard1 – 3.517 – 60Rarely a problem
Moderately hard3.5 – 760 – 120Spotting on glassware, some scale
Hard7 – 10.5120 – 180Visible scale, soap scum, dry skin
Very hard10.5+180+Heavy scale, appliance and water heater damage

4. Common problems and their fixes

ProblemLikely causeTypical fix
White scale, spots, dry skinHardnessWater softener
Pool smell or tasteChlorine or chloramineWhole-home carbon filter
Orange or brown stainsIronIron filter (plus softener)
Black stainsManganeseCatalytic or oxidizing filter
Rotten-egg smellHydrogen sulfideAir-injection filter
Blue-green stains, pinhole leaksLow pH (acidic water)Acid neutralizer
Bacteria in a well testColiform / E. coliUV disinfection
PFAS, lead, arsenic, nitrateVariesCertified reverse osmosis / PFAS system

5. When to test your water

  • Every year if you have a private well (bacteria, nitrate, pH, hardness, iron)
  • When you buy or sell a home
  • When taste, smell or color changes
  • After flooding, well repairs or nearby construction
  • If you're pregnant or have an infant
  • If you live near a known PFAS area and are on a well

We offer a free in-home water test for hardness, iron, pH, TDS and chlorine anywhere in Bucks County. For bacteria, arsenic, lead, nitrate or PFAS, use a PA DEP-accredited lab. We're happy to help you choose the right tests.

FAQ

Water quality questions.

How do I find out what's in my public water?

Every public water system must publish an annual Consumer Confidence Report (CCR), also called a water quality report. Search your utility's name plus "water quality report," or call them. It lists detected contaminants and how they compare with EPA limits.

Who is responsible for testing a private well?

The homeowner. No utility or agency routinely tests private wells, so it's up to you to test and treat your well water. Use a PA DEP-accredited laboratory for certified results.

What is a grain of hardness?

One grain per gallon (GPG) equals about 17.1 milligrams per liter of hardness, measured as calcium carbonate. Water above 7 GPG is considered hard, and above 10.5 GPG very hard.

Does Bucks County have PFAS in its water?

Some areas do. The best-known area is around the former military bases in Warminster and Horsham, which affected parts of Warminster, Warrington and Ivyland. Public suppliers have added treatment, but private wells should be lab-tested.

Better water for $2,950, installed.

A softener, whole-home carbon filtration and reverse osmosis drinking water. One flat price and a one-day install, anywhere in Bucks County.

Call Get In Touch